首页    焊接工艺    等离子点焊    PSW – 350 TL等离子多功能点焊焊机
PWS350
350点焊3
350点焊2
350点焊

PSW – 350 TL等离子多功能点焊焊机

多功能等离子焊接设备–焊接厚度约2.5mm(上层金属薄板)的理想解决方案。

PSW – 350 TL等离子多功能点焊焊机

Multifunctional device – the ideal solution for welding sheets up to ~2,5mm thick (upper sheet metal).

多功能等离子焊接设备–焊接厚度约2.5mm(上层金属薄板)的理想解决方案。

 

TECHNICAL DETAILS 技术细节

The focused electric arc provides high power density and accurate positioning to a spot weld, resulting in low welding times. The strong bundling of the electric arc and the short welding time causes only a small heat-effected zone to form, which has a lower thermal distortion in the component result.

聚焦电弧可提供高功率密度并精确定位以实现点焊,从而缩短焊接时间。强大的电弧能量束和短暂的焊接时间,仅形成一个小热影响区,从而使零件具有较低的热变形。

技术规格 Technical Specifications PSW – 350 TL
主电压 main voltage 3 x 400V AC ± 15% 50 / 60 Hz
电源连接 power connection 4 x 32A CEE plug, 6 mm²
焊接电流(60%ED) welding current (60% ED) 320A
焊接电流(100%ED) welding current (100% ED) 290A
控制范围 control range 3 ÷ 350A
空载电压 idle voltage 95V
防护等级 degree of protection IP 21 S
手动等离子气体控制 manual plasma control 0,2 ÷ 2,5 l Ar/min
手动保护气体控制 manual protection gas control 1,0 ÷ 25,0 l Ar/min
脉冲频率 pulse rate 0,1 – 3300Hz
脉冲占空比 pulse balance 1 – 99%
脉冲断流 pulse break current 10 – 100%
脉冲时间 pulse time 0,15 – 3000 ms
断流时间 break time 0,15 – 3000 ms
断流 break current 5 – 350A
重量 weight 105 kg
尺寸 dimensions 1200x520x940 mm

Option:
PGR-05: electr. Plasma control, range 0,1 ÷ 5 l/min
SGR-20: electr. Inert gas control, range 0,5 ÷ 20 l/min
MCC: motor control card to drive from an SBI wire case

  • high quality of the seam 高质量焊缝
  • high process saftey 高安全系数
  • high degree of automation 高度自动化
  • high productivity due to high welding speed 高焊接速度实现高生产率

APPLICATION 应用:

The plasma spot welding machine is used for sheets up to 2,5mm thick (upper sheet metal). The main materials used for plasma spot welding are stainless steel, steel, titanium, zirconium and copper.

等离子点焊焊机用于厚度不超过2.5mm的薄板(上层金属薄板)。等离子点焊的主要材料是不锈钢,钢,钛,锆和铜。